Stress Calculator

Normal stress σ = F/A.

FreeNo accountOn your device

Runs in your browser. How to verify

Loading tool…

About this tool

Enter axial force in newtons and cross-section area in square metres to get stress in pascals, with MPa shown for convenience.

How to use

1
Step 1
Enter the force in N.
2
Step 2
Enter the cross-sectional area in m² (1 cm² = 0.0001 m²).
3
Step 3
Press Calculate.

How it works

Stress is force spread over area, so halving the area doubles the stress. Compare the result with the material's yield strength to see how close a member is to permanent deformation. One pascal is one newton per square metre; one MPa is one newton per square millimetre.

σ = F ÷ A

Worked example

A 50 kN tension load

Input
F = 50,000 N, A = 0.0005 m²
Output
1.0 × 10⁸ Pa = 100 MPa
Walkthrough
50,000 ÷ 0.0005 = 100,000,000 Pa = 100 MPa.

Limitations

  • Uniform axial stress only; no bending or shear.
  • No safety factor is applied.

Questions

What is 10 kN on 0.001 m²?
10 MPa.
How do I convert cm² to m²?
Multiply by 0.0001. A 5 cm² section is 0.0005 m².
What is 1 MPa in N/mm²?
1 N/mm².

Features

  • Pa and MPa
  • Axial stress
  • Runs in your browser

Related resources

Guides and videos from around the web—opens on YouTube or the publisher’s site.

  • Mean, Variance and Standard Deviation

    StatQuest with Josh Starmer

    Tolerance and variation thinking in engineering data.

    Watch on YouTube
  • Introduction to scientific notation

    Khan Academy

    Large/small magnitudes in engineering calculations.

    Watch on YouTube