Strain Calculator

Engineering strain ε = ΔL/L₀.

FreeNo accountOn your device

Runs in your browser. How to verify

Loading tool…

About this tool

Enter the change in length and the original length in the same unit (metres by default) and get the dimensionless strain and microstrain.

How to use

1
Step 1
Enter ΔL, the elongation.
2
Step 2
Enter the original length L₀.
3
Step 3
Press Calculate to read ε and με.

How it works

Strain is dimensionless and often small for metals, so it is quoted in microstrain (10⁻⁶). Multiplying strain by Young's modulus gives stress in the elastic range. Compression gives negative strain.

ε = ΔL ÷ L₀      1 με = 10⁻⁶

Worked example

2 mm stretch on a 2 m bar

Input
ΔL = 0.002 m, L₀ = 2 m
Output
ε = 0.001 (1000 με)
Walkthrough
0.002 ÷ 2 = 0.001, which is 1,000 microstrain.

Limitations

  • Engineering (small) strain, not true strain.
  • Both lengths must share a unit.

Questions

What is strain for 0.5 mm over 1 m?
0.0005, or 500 microstrain.
Does strain have units?
No, it is a ratio of lengths.
How do I get stress from strain?
Multiply by Young's modulus within the elastic range.

Features

  • ε and microstrain
  • Any consistent unit
  • Runs in your browser

Related resources

Guides and videos from around the web—opens on YouTube or the publisher’s site.

  • Newton's Laws: Crash Course Physics #5

    CrashCourse

    Force and motion basics for engineering calculators.

    Watch on YouTube
  • Cylinder volume and surface area

    Khan Academy

    Solid geometry used in many engineering estimates.

    Watch on YouTube