RC Time Constant Calculator

τ = RC plus charging and discharging voltages.

FreeNo accountOn your device

Runs in your browser. How to verify

Loading tool…

About this tool

Enter resistance, capacitance, time and source voltage to get τ and the capacitor voltage during charging or discharging.

How to use

1
Step 1
Choose τ, charging or discharging.
2
Step 2
Enter R in ohms, C in farads, t in seconds and Vin.
3
Step 3
Press Calculate.

How it works

The time constant is the time to reach 63.2% of full charge. To size a delay or filter, pick R and C so τ matches the timescale you need. An RC low-pass filter has a cutoff frequency of 1 ÷ (2πRC).

τ = RC      Vc = Vin(1 − e^(−t/τ))      Vc = Vin e^(−t/τ)

Worked example

A 10 ms timer

Input
R = 10,000 Ω, C = 1e-6 F, t = 0.01 s, Vin = 5 V
Output
τ = 0.01 s; charge 3.1606 V; discharge 1.8394 V
Walkthrough
τ = 10,000 × 1e-6 = 0.01 s. At t = τ: 5 × 0.63212 = 3.1606 V up, or 5 × 0.36788 = 1.8394 V down.

Limitations

  • Ideal parts; leakage and source impedance not modelled.
  • Starting charge must be zero for the charging mode.

Questions

What is the time constant of 10 kΩ and 1 µF?
10 ms.
What voltage after one time constant on a 5 V supply?
3.16 V charging; 1.84 V discharging.
What is the RC low-pass cutoff?
f = 1 ÷ (2πRC). For 10 kΩ and 1 µF that is about 15.9 Hz.

Features

  • τ, charge, discharge
  • Any R and C
  • Runs in your browser

Related resources

Guides and videos from around the web—opens on YouTube or the publisher’s site.

  • Mean, Variance and Standard Deviation

    StatQuest with Josh Starmer

    Tolerance and variation thinking in engineering data.

    Watch on YouTube
  • The Pythagorean theorem intro

    Khan Academy

    Right-triangle geometry in structures and layouts.

    Watch on YouTube