Grade Calculator
Percent grade from rise and run.
Loading tool…
About this tool
Enter rise and run in the same unit to get the grade as a percentage and the angle in degrees.
How to use
1
Step 1
Enter the rise (vertical change).
2
Step 2
Enter the run (horizontal distance) in the same unit.
3
Step 3
Press Calculate.
How it works
Grade is the tangent of the slope angle expressed as a percentage, so 100% is 45°, not vertical. Accessibility ramps are often limited to 1:12 (8.33%). Roads and rail quote grade because it is easy to read from a plan.
grade % = rise ÷ run × 100 angle = arctan(rise ÷ run)
Worked example
A 1:12 ramp
- Input
- rise = 1, run = 12
- Output
- 8.3333%, 4.7636°
- Walkthrough
- 1 ÷ 12 = 0.08333, so 8.33%, and arctan(0.08333) = 4.764°.
Limitations
- Horizontal run, not slope length.
- Does not apply a code limit.
Questions
What is a 1:12 slope as a percent?
8.33%, or 4.76°.
What is a 1 in 10 grade?
10%.
What is a 100% grade?
A 45° slope, where rise equals run.
Features
- Percent and degrees
- Any unit
- Runs in your browser
Related resources
Guides and videos from around the web—opens on YouTube or the publisher’s site.
Cylinder volume and surface area
Khan Academy
Solid geometry used in many engineering estimates.
Watch on YouTubeThe Pythagorean theorem intro
Khan Academy
Right-triangle geometry in structures and layouts.
Watch on YouTube
- University Physics Volume 1
OpenStax
Free physics text supporting engineering math tools.
- The Engineering ToolBox
Engineering ToolBox
Reference data for fluids, materials, and conversions.
More Engineering tools
See all ›Concrete Volume Calculator
Slab/pour volume with waste factor.
Load Calculator
UDL, support reactions, and psf area loads.
Power Calculator
Electrical power from P = VI, I²R, or V²/R.
Resistor Calculator
Series and parallel equivalent resistance.
Capacitor Calculator
Series/parallel capacitance and capacitive reactance.
Rebar Calculator
Steel rebar mass from diameter, length, and count.