Flow Rate Calculator

Volumetric flow from Q = Av or V/t.

FreeNo accountOn your device

Runs in your browser. How to verify

Loading tool…

About this tool

Choose area times velocity or volume over time. Output is volumetric flow rate in cubic metres per second.

How to use

1
Step 1
Choose Q = A×v or Q = V/t.
2
Step 2
Enter area in m² and velocity in m/s, or volume in m³ and time in s.
3
Step 3
Press Calculate.

How it works

Flow rate is how much fluid passes a section per second. By continuity, if a pipe narrows the velocity must rise to keep Q the same. 1 m³/s equals 1,000 litres per second.

Q = A × v      Q = V ÷ t

Worked example

Air in a duct

Input
A = 0.05 m², v = 2 m/s
Output
0.1 m³/s
Walkthrough
0.05 × 2 = 0.1 m³/s, which is 100 L/s. A 1 m³ tank filled in 10 s gives 1 ÷ 10 = 0.1 m³/s too.

Limitations

  • Output is m³/s only.
  • Assumes uniform velocity across the section.

Questions

How do I convert m³/s to litres per second?
Multiply by 1,000. 0.1 m³/s is 100 L/s.
What happens to velocity when a pipe narrows?
It rises so that A × v stays constant.
What flow fills 1 m³ in 10 s?
0.1 m³/s.

Features

  • Two methods
  • SI units
  • Runs in your browser

Related resources

Guides and videos from around the web—opens on YouTube or the publisher’s site.

  • Cylinder volume and surface area

    Khan Academy

    Solid geometry used in many engineering estimates.

    Watch on YouTube
  • Introduction to scientific notation

    Khan Academy

    Large/small magnitudes in engineering calculations.

    Watch on YouTube