Current Divider Calculator

Branch currents for two parallel resistors.

FreeNo accountOn your device

Runs in your browser. How to verify

Loading tool…

About this tool

Enter the total current entering two parallel resistors and each resistance. The result is the current through each branch.

How to use

1
Step 1
Enter the total current in amps.
2
Step 2
Enter R1 and R2 in ohms.
3
Step 3
Press Calculate to read I1 and I2.

How it works

Current splits inversely to resistance: the smaller resistor carries more. Note that each branch current uses the other resistor in the numerator. The two currents always add back to the total.

I₁ = I × R₂ ÷ (R₁ + R₂)      I₂ = I × R₁ ÷ (R₁ + R₂)

Worked example

2 A into 100 Ω and 300 Ω

Input
I = 2 A, R1 = 100 Ω, R2 = 300 Ω
Output
I1 = 1.5 A, I2 = 0.5 A
Walkthrough
I₁ = 2 × 300 ÷ 400 = 1.5 A; I₂ = 2 × 100 ÷ 400 = 0.5 A. Sum = 2 A.

Limitations

  • Two branches only.
  • DC or resistive loads.

Questions

Which branch carries more current?
The one with lower resistance. 100 Ω takes 1.5 A against 0.5 A for 300 Ω.
What if the resistors are equal?
They share the current equally.
How do I check the answer?
Both branch voltages must match: 1.5 × 100 = 150 V and 0.5 × 300 = 150 V.

Features

  • Two-branch split
  • Checks sum to total
  • Runs in your browser

Related resources

Guides and videos from around the web—opens on YouTube or the publisher’s site.

  • Cylinder volume and surface area

    Khan Academy

    Solid geometry used in many engineering estimates.

    Watch on YouTube
  • The Pythagorean theorem intro

    Khan Academy

    Right-triangle geometry in structures and layouts.

    Watch on YouTube