Serial Dilution Calculator

Build a serial dilution concentration table from stock and factor.

FreeNo accountOn your device

Runs in your browser. How to verify

Loading tool…

About this tool

Enter the stock concentration, the dilution factor per step and the number of steps. The tool lists the concentration of every tube.

How to use

1
Step 1
Enter the stock concentration in any unit.
2
Step 2
Enter the dilution factor, for example 10 for a ten-fold series.
3
Step 3
Enter the number of steps and press Calculate.

How it works

Each tube is the previous tube divided by the dilution factor, so tube n holds stock ÷ factorⁿ. A ten-fold series drops one order of magnitude per tube; a two-fold series halves each time. Transfer 1 part into (factor − 1) parts of diluent to get a factor of 10 from 1 + 9.

C(n) = C(stock) ÷ factorⁿ

Worked example

Ten-fold series

Input
stock = 100, factor = 10, steps = 3
Output
Tubes: 100, 10, 1, 0.1
Walkthrough
100 ÷ 10 = 10, ÷ 10 = 1, ÷ 10 = 0.1 at tube 3.

Limitations

  • Reports concentrations only, not pipetting volumes.
  • Assumes perfect mixing and no loss at each transfer.

Questions

What is the final concentration after 3 ten-fold dilutions of 100?
0.1, which is 100 ÷ 1000.
How do I make a 1:10 dilution?
Mix 1 part sample with 9 parts diluent.
What does tube 0 mean?
It is the undiluted stock.

Features

  • Every tube listed
  • Any dilution factor
  • Runs in your browser

Related resources

Guides and videos from around the web—opens on YouTube or the publisher’s site.

  • Stoichiometry Basic Introduction

    The Organic Chemistry Tutor

    Mole ratios for stoichiometry and reaction tools.

    Watch on YouTube
  • Stoichiometry Mole to Mole Conversions

    The Organic Chemistry Tutor

    Worked mole conversions to check calculator output.

    Watch on YouTube